Pure Performance Super Duty 8 Inch Rear Coil Over Long Arm Upgrade

8LUG Truck Gear is proud to announce the Super Duty 8 Inch Rear Coil Over Upgrade by Pure Performance!

The Desert Race System is the best rear end suspension system ever developed for Ford Super Duty 4x4’s. This is the perfect complement to our 8” coil over Pre-Runner front end system. The major feature of this system is the conversion from leaf springs over to a multi link long arm trailing arm system with coil over racing shocks. The new Pure Performance rear trailing arms are made from 3/16” thick laser cut steel, fully boxed and seam welded. The trailing arms that locate the rear axle are stronger than your Super Duty frame! Upper torque arms allow for perfect pinion angle adjustment each and every time. This arm assembly ensures you will never get axle wrap again. The lateral stability of the rear of your Super Duty is controlled by our double adjustable rear track bar that ensures proper lateral axle placement each and every time! All of our heavy duty brackets are made from ¼ inch thick laser cut steel for a lifetime of use and abuse. The Desert Race system comes with our Pure Performance Prodigy 12" travel 2.625" rear coil over shock assemblies tuned specifically for the back end or your Super Duty. No more axle wrap! Better ride quality! Better off-road ability! Enough said. This system comes with our exclusive abuse proof lifetime guarantee!  

Benefits:

• Better highway ride quality and response than any other system on the market
• The strongest trailing arms ever made
• Off-road performance that can't be beat
• Allows for up to 38" tall tires.
• Adjustable rear pinion angle.
• Eliminates rear axle wrap - even for you diesel owners
• Massive Pure Performance Prodigy 12" travel rear coil over shock assemblies
• Exclusive abuse proof lifetime guarantee on all hard parts

System Includes:
 

• (2) Pure Performance Prodigy 12" travel 2.625 coil over shock assemblies
• (2) rear upper coil over mounts made from 1/4" thick laser cut steel
• (2) rear lower coil over mounts made from 1/4" thick laser cut steel
• (2) rear long arm brackets made from 1/4" thick laser cut steel
• (2) rear trailing arms made from 3/16" thick steel fully boxed and seam welded
• (2) adjustable rear torque arms made from 1.625" solid alloy steel(1) double adjustable rear track bar made from 1.625" solid alloy steel
• (1) rear track bar bracket made from 1/4" thick laser cut steel
• Hardware and detailed instructions. 

Notes: 

*Welding required for most rear mounts.

**Designed for Extra Cab Short Bed, all others may require custom location of rear trailing arm mounts.

***Expect a minor payload capacity reduction with system. However, our rear axle mounts are designed to allow the use of most aftermarket air bag systems to increase payload capacity beyond that of your standard ¾ ton pick up.

****Vehicles equipped with a carrier bearing in the rear driveshaft may require a seperate carrier bearing drop kit.