Carli Extreme Duty Lower Ball Joints

These will begin shipping in early March 2010

See bottom of page for special package deal with Carli upper ball joints.

Dodge Ram Lower Ball Joints

Starting out from billet 4130 stock and CNC machined into a two-piece assembly, then case hardened, this truly is a bullet-proof component. The best part is the ride quality improvement over O.E.M. ball joints. The ball and socket on factory Dodge Ram Upper Ball Joints is separated by a plastic break-away that under severe stress, deflects.

By removing even .0625 inches of deflection times two axle ends omits 1/6" of an inch, or more, of ball joint deflection. You can feel it in the steering wheel. 35 and 37 inch tires, more stress and off-road impacts only exaggerate the movement, and subsequently, its affect. Your truck feels tighter and the steering wheel goes numb, even over pot holes and rail road tracks. The secondary tire movement, once eliminated, gives you a more controlled feel. Sometimes when you hit a sharp lip on the street, it feels like you hit two bumps, that aftershock is the tire's secondary movement from O.E.M. lower ball joint deflection. The front end of your truck will feel improved, or we'll buy the product back from you - guaranteed.
 

DODGE RAM FITMENT GUIDE

• 03 - 08 2500 / 3500 4x4
• 03 - 08 1500 Megacab 4x4

SPECIFICATIONS

• Case Hardened 4130 Construction
• 2-Stage Dry Lube Process
• Easy Maintenance
• Life Of The Vehicle Product