Carli Dodge High Clearance Fabricated Control Arms

$950.00
SKU: CS-DFCA
Qty:
Version:
Eligible for FREE Shipping

Carli Dodge High Clearance Fabricated Control Arms

Carli Suspension 8Lug Free Shipping

Dodge Ram High Clearance Control Arms

Our focus in building this control arm kit was to have the best product on the market. Our control arms are 1/2 longer than O.E.M and are fabricated using 1/4" plate steel. These are then welded with internal bracing. The higher offset desing allows for more tire clearance for those running stock wheels or wheels with backspaces greater than 5.5" Having these spherical joints on each end eliminates resistance caused by rubber bushing style set ups, in return creating a smoother ride. These control arms are finished off with a Satin Black powder coat to ensure long term protection from corrosion.

Designed from the ground up for maximum tire clearance and unmatched strength, Carli's Fabricated High Clearance Control Arms are everything one needs for enhanced ride and ultimate performance. Our control arms are longer than OEM for optimum tire fitment in the wheel well, while the recessed pockets on both upper and lower arms regain needed turning radius when running wide offroad tires. At the heart of the control arms is Carli's unique inner bracing structure that ties all outer facets into one cohesive monolith. Expertly welded to each fabricated arm is a spherical joint that is fully serviceable and rebuildable. Having these spherical joints on each end eliminates the kinetic chatter caused by rubber bushing style set ups, in return creating a smoother ride. These control arms are finished off with a Satin Black powder coat to ensure long term protection from corrosion.

DODGE RAM FITMENT GUIDE:

  • 2003 - 2012 2500 / 3500 4x4
  • 2006 - 2009 1500 Megacab 4x4
  • 2005 - 2012 Power Wagon

SPECIFICATIONS:

  • Fabricated Plate Steel Construction
  • Maximum Tire Clearance
  • Hardened Steel Joints
  • Zirc Fittings For Easy Maintenance
  • Manufactured In-House

Part Numbers

  • CS-DFCA-03 | 03-09
  • CS-DFCA-10 | 10-12

Features:

  • Boxed Construction with Internal Bracing
  • Mig Welded
  • Designed for Maximum Tire Clearance
  • Hardened Steel Joints
  • Zirc Fittings For Easy Maintenance
  • Manufactured In-House
  • Rebuildable/Greasable

How and Why...

Our joints are .250 wall chromoly tube that is custom machined and finally laser cut with a retainer wall on one side and a retainer clip groove on the other. We drop in chromoly ball centers that are hardened to a high rockwell with urethane bushings, interally lubricated with Red Line synthetic grease. Zirc fittings compliment each joint and we have side specific fittings for easy maintenance, you can get your grease gun on the joints with ease.

What you want to watch out for are control arms with rubber, or Delrin style joints. When the Dodge 4-link front end cycles, it isn't a perfectly vertical movement, there is left-to-right geometry as well as forward and backwards movement. What this requires is .25 inch worth of movement. We account for this by housing our hardened chromoly joint with a urethane coupling. If the two points are fixed, there will be excessive bind and any other style joint will eventually wear out and need replacement. Ours are designed to withstand the worst conditions possible, which include the 2007 SCORE International Baja 1000, and performed flawlessly...

American Made Dodge Ram Suspension Components

Every control arm is hand assembled right here in the Carli Suspension shop. These controls arms consist of being jig assembled and welded. Following this is a black powder coating finish and its on to the assembly, adding hardened steel joints, urethane couplers and steel retaining plates and ring.

Control arm joints come pre-lubricated with Red Line Synthetic high performance grease, the best we can get that doesn't break down the urethane couplings. Of course every arm is assembled with a zirc fitting per joint that is positioned for easy maintenance

Fitment Notes

The Fabricated Control Arms are currently designed to accommodate 37" tires with maximum clearance on a variety of wheels. Please be advised that 35" Toyo Tires mounted on stock (OEM) rims have opportunity to rub slightly on the control arms. Although we check fitment on a large variety of tire/wheel combos during pre-production testing, it is impractical and nearly impossible to check every tire/wheel variation and as such we cannot guarantee fitment of tires for all applications.

Customer Reviews

Overall:
Reviewed by G. McGrath, 04/20/2015

Wow!! What a difference in the ride, no more binding. U can see the quality as soon as u pick them up. Well worth the money. 37"s here i come. Thanks to 8 lug for the great service.

Shop By Brand

Deal of the Week

ARP 98.5-2012 Custom Age 625+ Cummins 5.9/6.7 Headstud kit

Shopping Cart

Shopping Cart Empty